AT&T E2801 - Manual (Page 15)

12
Telephone operation
Basic operation
Last number redial
Press
REDIAL/
PAUSE
to display the most recently
dialed numbers (up to 32 digits). Press
CID/-VOLUME
or
DIR /VOLUME+
repeatedly to view up to five
recently called numbers. The handset beeps twice at
the beginning or end of the list. Press
OFF/
CLEAR
to exit. Press PHONE/
FLASH or SPEAKER to
redial any displayed number. Or press PHONE/
FLASH
then REDIAL/
PAUSE
to dial the most recently dialed
number (up to 32 digits).
Press
DELETE to delete the displayed number from
the redial memory.
Temporary ring silencing
Press
OFF/
CLEAR or MUTE while the telephone
is ringing to silence the ringer temporarily. This
will silence the ringer without disconnecting the
call.
The next incoming call will ring normally.
Handset locator
If the handset is misplaced, press
HANDSET LOCATOR
on the telephone base. The handset will play a paging
tone for 60 seconds to help you locate the handsets. To
stop the paging tone, press
PHONE/
FLASH , SPEAKER,
or any dial pad key (0-9, *, or #) on any of the handset,
or press
HANDSET LOCATOR on the telephone base.
NOTES:
1. If the handset ringer is set to off (0), the handset locator
feature is not available (see page 14). (see page 14)..
2. During a page, if you press During a page, if you press
OFF/
CLEAR or
MUTE
on
the handset (see this page above), the ringer of the hand-
set will be silenced, but it will not cancel the page.
REDIAL
555-1234
RINGER MUTE