Lenovo ThinkServer RD650 - Manual (Page 116)

5. Loosen the two screws and grasp the AnyRAID adapter or the pass-through board by its edges and
carefully pull it out.
Note: The AnyRAID adapter or the pass-through board might fit tightly into the slots. If necessary,
alternate moving each side of the AnyRAID adapter or the pass-through board a small and equal
amount until it is removed from the slots.
Figure 75. Removing the AnyRAID adapter or the pass-through board
6. Touch the static-protective package that contains the new AnyRAID adapter or the pass-through board
to any unpainted surface on the outside of the server. Then, take the new AnyRAID adapter or the
pass-through board out of the package.
Note: Carefully handle the AnyRAID adapter or the pass-through board by its edges.
7. Position the new AnyRAID adapter or the pass-through board near the backplane. Then, carefully
press the AnyRAID adapter or the pass-through board straight into the AnyRAID adapter slots until
it is securely seated.
Figure 76. Installing the AnyRAID adapter or the pass-through board
102 ThinkServer RD650 User Guide and Hardware Maintenance Manual