Lenovo ThinkServer RD650 - Manual (Page 48)

ThinkServer RAID 720ix AnyRAID Adapter
The following illustration shows the connectors on the ThinkServer RAID 720ix AnyRAID Adapter.
Figure 17. ThinkServer RAID 720ix AnyRAID Adapter
1 SATA connector
Used to connect the SATA signal cable from any of the following component:
• Rear backplane for up to two 2.5-inch drives (available on some models)
• Internal tape drive (available on some models)
2 ThinkServer RAID Super Capacitor Module connector
Used to connect to the ThinkServer RAID Super Capacitor Module. See “Server components” on page 28.
3 PCIE 0 connector
4 PCIE 1 connector
Used to connect to the AnyRAID connector 0–1 on the system board. See “System board components”
on page 43.
34 ThinkServer RD650 User Guide and Hardware Maintenance Manual