Lenovo ThinkServer RD650 User Manual
Page 194
9. Remove the PCIe cards installed on the system board. See “Removing a PCIe card from the system
10. Remove the rear backplane/cage assembly. See “Removing the rear backplane/cage assembly” on
11. Remove the AnyFabric adapter if one is installed. See “Removing the AnyFabric adapter” on page 118.
12. Lift the release pin
2
to disengage the system board from the chassis. Then, use the lifting handle
1
and release pin
2
to move the system board to the front of the server to disconnect it from the power
distribution board.
Notes:
• To show the main parts clearly, not all components are illustrated in the following figure.
• Carefully handle the system board by the release pin
2
and the lifting handle
1
.
1
2
Figure 177. Disengaging the system board from the power distribution board
180
ThinkServer RD650 User Guide and Hardware Maintenance Manual