Lenovo ThinkServer RD650 - Manual (Page 180)

7. Slide the new optical drive into the optical drive bay from the front until it snaps into position.
Figure 160. Installing the optical drive
8. Connect the connector 1 to the rear of the optical drive.
1
Figure 161. Connecting the connector 1 to the rear of the optical drive
9. If you are instructed to return the old optical drive, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the replacement, go to “Completing the parts replacement” on page 183.
Installing or replacing the tape drive
Note: This topic applies to server models with 2.5-inch-drive bays.
This topic contains the following information:
• “Installing the tape drive” on page 167
166 ThinkServer RD650 User Guide and Hardware Maintenance Manual