Konica Minolta bizhub PRESS C70hc - Manual (Page 121)

IC-601 10-20
10.3 Parameter details 10
10.3.12 [Forms] tab
The form image file can be superimposed.
Select [WorkFlow] tab - [Print Mode] - [From] to save a form file. For details, refer to page 10-23.
[1 Dot Line Em-
phasis] Off, On Select this check box to emphasis an ultrafine line.
[Use CIE Color] Off, On Select this check box to use a CIE color space at print-
ing in gray scale.
[Glossy] Off, On Select this check box to set a glossy mode.
C8000 does not support [Glossy].
Function Name Option Description
Function Name Option Description
[Form] [Off], [Registered form
name.] Set the form function.
[Forms Print
Mode] [Repeated], [Once] Select [Repeated] to overlay all form pages repeatedly
in order from the first page on a printing document.
Select [Once] to overlay all forms pages only once in or-
der from the first page on a printing document.
[Per Page Set-
tings] [Form], [Page Number] You can set an overlay on a page basis.
However, the maximum number will be different de-
pending on the selected form and page.
[Prepend] [Off], [Registered form
name.] Set the selected form before the current job.
[Append] [Off], [Registered form
name.] Set the selected form after the current job.
[Copy to Clip-
board] - Click to copy the preview page to the clipboard.
You can check a layout by pasting the image from the
clipboard onto a printing document.
[Clear Form] - Click to clear the selected form from the image control-
ler. You need to input a password to clear the form.
The password is set in the machine. For details, refer to
page 14-12.