Konica Minolta bizhub PRESS C70hc - Manual (Page 124)

IC-601 10-23
10.3 Parameter details 10
10.3.15 [WorkFlow] tab
Function Name Option Description
[Send E-mail] [Off], [On Error], [Always] Set this to send an E-mail to a specified address after
completing a print job.
[User Authentica-
tion] [User Name], [Pass-
word], [Again] Set a user name and password to a print job if the user
authentication function is enabled in the machine.
You need to input the user name and password to print
if [User Authentication] is checked.
For details, refer to page 13-10.
[Account Track] [Account Name], [Pass-
word], [Again] Set an account name and password to a print job if the
user authentication function is enabled in the machine.
This identification information is used to track the
number of printouts.
You need to input the account name and password to
print if [Account Track] is checked.
For details, refer to page 13-12.
[Print Mode] [Print], [Spool], [Hold],
[Print and Hold], [Form] Select a print method.
When [Print] is selected, the print job is printed without
it being stored in a hard disk.
When [Spool] is selected, the print job is stored in the
hard disk in the main body temporarily, and then print-
ed.
It can prevent the intermittent printing that may be ob-
served when print a job with a lot of pictures, etc.
If you select [Form], you can save an image file to the
image controller and use it as a background in the
[Form] tab for this driver.
Refer to page 10-20 for more detailed information on
[From].
Refer to page 13-6 for more detailed information on
[Hold], [Print and Hold].
[Hold in] [Main Body], [Image
Controller] If you selected [Hold] or [Print and Hold] in [Print Mode],
select either of the HDD as destination. For details, re-
fer to page 13-6.