Konica Minolta bizhub 4050 - Manual (Page 49)

4.7 Major messages and actions 4
[Maintenance/Troubleshooting] 4-16
[Imaging Unit Installation Er-
ror] The Imaging Unit is not installed
correctly. Install the Imaging Unit correctly.
[Install toner cartridge.] The Toner Cartridge is not in-
stalled correctly. Correctly install the Toner Car-
tridge, and close all doors.
For details, refer to page 2-3.
[Maintenance Kit Yield] The maintenance kit has expired. Replace the maintenance kit.
For details, contact your service rep-
resentative.
[Imaging Unit will require re-
placement soon.] The operating life of the Imaging
Unit has expired. Replace the Imaging Unit. For de-
tails, refer to page 2-5.
If appears [Contact your service rep-
resentative.], contact your service
representative.
[Replace Toner] Toner is depleted. Replace the Toner Cartridge.
For details, refer to page 2-3.
[Incorrect Toner] An incorrect Toner Cartridge
has been installed. Install a Toner Cartridge which is
our genuine product with the correct
color and correct marketing area.
[Incorrect imaging unit] An incorrect Imaging Unit has
been installed. Install an Imaging Unit which is our
genuine product with the correct
color and correct marketing area.
[Paper Size Mismatch] Paper of the specified size is not
loaded into a tray. Load the correct paper into the dis-
played tray.
[Paper Empty] A print job was executed by
specifying the Manual Feed
Tray from the printer driver, but
no paper was loaded in the Man-
ual Feed Tray. Load paper into the Manual Feed
Tray.
A print job was executed by
specifying Tray X from the printer
driver, but no paper was loaded
in Tray X. Load paper into Tray X.
[Paper Size/Type Mismatch] The size and type of the paper
loaded in the tray specified from
the printer driver are different
from those of the paper loaded in
the tray on the main unit. Load the paper of the appropriate
size and type into the tray, then
specify the correct size and type for
the loaded paper on the Control
Panel.
The size and type of the paper in
the tray that are specified on the
Control Panel do not match
those of the paper actually load-
ed in the tray. Load the paper of the appropriate
size and type into the tray, then
specify the correct size and type for
the loaded paper on the Control
Panel.
[Output Tray Full] The amount of paper output to
the Output Tray has reached the
maximum. Remove the paper from the Output
Tray.
[Memory Overflow] Data has been received over the
maximum memory size. Cancel the job to reduce the amount
of data, then execute the job again.
All the available space in memo-
ry has been used up by docu-
ment scanning. Reduce the amount of original data.
[Replace Staples] Staples have run out. Replace the staple case.
For details, refer to page 2-7.
[Stored Job Error] The option configuration is dif-
ferent from that specified when a
job was saved. Return to the option configuration
specified when a job was saved.
[HDD Capacity Over] The HDD capacity has become
full. Delete data saved on the HDD, if
necessary.
[Document Registration
Overload] The number of files on the HDD
has reached the upper limit. Delete data saved on the HDD, if
necessary.
Message Description Remedy