Konica Minolta bizhub 4050 - Manual (Page 34)

[Introduction] 5-4
5.2 Loading the original onto the Original Glass 5
5.2 Loading the original onto the Original Glass
Original available on the Original Glass
Loading the original onto the Original Glass
Using the Original Glass allows you to scan an original such as a book or card, which is not available in the
ADF.
1
Open the ADF.
2
Load the original into the Original Glass with the side to be photocopied facing downward.
% Place the top side of the original at the back, and align the original to the mark at the left rear of
the Original Scale. When loading in a different orientation, be sure to specify the loading direction
of originals.
% When copying a highly transparent original such as transparencies or tracing paper, place a blank
sheet that is the same size as the original on the original to enable clear scanning.
NOTICE
Do not place an original heavier than 22-1/16 lb (10 kg) on the original glass. Furthermore, do not use
excessive force to press down on a book or any other form of original that must be spread on the original
glass. Otherwise, the machine may be damaged or a failure may occur.
3
Close the ADF.
NOTICE
When placing a thick book or a three-dimensional object on the original glass, you do not need to close
the ADF to scan it. A bright light may be emitted through the Original Glass. Be careful not to look di-
rectly at it. Note, however, that the light coming through the original glass is not a laser beam, and will
not expose the user to related hazards.
Item Specifications
Original types Sheets, books (two-page spread), cards, three-dimensional objects
Max. original size A4 or Legal
Original loading capaci-
ty Max. 22-1/16 lb (10 kg)