3 switching the entry or selection screen, 4 precautions on using the touch panel, Switching the entry or selection screen -6 – Konica Minolta bizhub 4050 User Manual

Page 50: Precautions on using the touch panel -6

Advertising
background image

[Introduction]

7-6

7.3

Touch Panel

7

7.3.3

Switching the entry or selection screen

Tap a target input area or icon to switch to the entry or selection screen.

Used to switch to the Select screen to enter text or select a registered item.

d

Reference

For details about the icon types, refer to page 7-9.

7.3.4

Precautions on using the Touch Panel

This machine features a capacitance-base touch panel. Note the following points when operating the Touch
Panel.

-

Use your finger or the Stylus Pen. Note that the Touch Panel will not respond appropriately if you op-
erate it using your nail or a pen tip instead of your finger or the Stylus Pen.

-

Applying a strong force to the Touch Panel will damage the Touch Panel, and potentially cause a
breakage.

-

When operating the Touch Panel, do not press on it using excessive force or with a pointed object such
as a mechanical pencil.

-

Be careful not to operate Touch Panel with wet fingers. It may cause Touch Panel to operate in unex-
pected ways.

-

If you operate the Touch Panel with a gloved finger, the Touch Panel will not respond normally. You
should operate it with a bare finger or using the Stylus Pen.

-

Note that the Touch Panel may not respond normally if the distance between the user and fluorescent
light is 19-11/16 inches (500 mm) or less when you operate the Touch Panel.

-

You must not use the Touch Panel beside equipment that generates electrical noises such as an electric
generator or air conditioner. Otherwise a malfunction may be caused by an influence of electrical nois-
es.

Advertising
This manual is related to the following products: