Replacing the transfer belt unit, Replacing the transfer belt unit 218 – Konica Minolta bizhub C20X User Manual
Page 232
Advertising
Replacing Consumables
218
Replacing the Transfer Belt Unit
When the time to replace the transfer belt unit is reached, the message
Trans. Belt Life
appears. Printing can continue even after this mes-
sage appears; however, since the print quality is reduced, the transfer belt
unit should be replaced immediately.
1
Turn off the machine and discon-
nect the power cord and inter-
face cables.
2
Pull the lever, and then open the
right door.
"
Before opening the right
door, fold up Tray 1.
Advertising
This manual is related to the following products: