Konica Minolta bizhub C20X - Manual (Page 36)

About the Control Panel 22
3 Scan data desti-
nation Indicates the specified destination for the scan data.
For details on specifying the destination of the data,
refer to “Specifying the Data Location” on page 176
and “Specifying the Destination Address (Scan to
E-mail/FTP/SMB)” on page 178.
"
If no destination has been specified, SCAN
TO appears.
4 Single-sided/
double-sided
scanning Indicates whether double-sided scanning or sin-
gle-sided scanning is selected. For details on select-
ing double-sided/single-sided scanning, refer to
“Setting Duplex (Double-Sided) Scanning” on page
194.
5 Scan size Indicates the scan size that is selected. For details
on selecting the scan size, refer to “Setting the Scan
Size” on page 195.
6 Scan color Indicates the scan color that is selected. For details
on selecting the scan color, refer to “Setting the Scan
Color” on page 195.
7
SUBJECT
Select this menu item to specify the subject. For
details on specifying the subject, refer to “Specifying
the Subject” on page 195.
"
This menu item does not appear if an FTP
address or SMB address was specified as the
destination.
8
CANCEL
RESERV.
Select this menu item to display the list of jobs
queued for transmission and to delete a job. For
details, refer to “Deleting a Queued Transmission
Job” on page 196.
"
This menu item does not appear if an e-mail
address, FTP address or SMB address was
specified as the destination.
No. Indication Description