Status, error, and service messages 293 – Konica Minolta bizhub C20X User Manual

Page 307

Advertising
background image

Status, Error, and Service Messages

293

NOT INSTALLED I-UNIT

CHECK x

The indicated imag-
ing unit is not
installed.

Install the indicated
imaging unit.

NOT INSTALLED TONER

CHECK x

The indicated toner
cartridge is not
installed.

Install the indicated
toner cartridge.

NOT REGISTERED

No speed dial desti-
nation or group dial
destination is regis-
tered.

Directly type in the
destination address for
the scan data, or regis-
ter a speed dial desti-
nation or group dial
destination and try
specifying the destina-
tion address again.

OUTPUT TRAY FULL

REMOVE PAPER

The output tray is
full of paper.

Remove all paper from
the output tray.

OVER SEARCH TIME

Communication with
the LDAP server
has timed out.

Establish a connection
with the LDAP server
again.

PAPER EMPTY

LOAD PAPER (xxx)

The indicated paper
tray has run out of
paper.

Load media into the
indicated tray.

PAPER SIZE ERROR

RESET PAPER (xxx)

Paper of the
selected size is not
loaded in a paper
tray.

Load paper of the
selected size into a
paper tray.

REMOVE ORIGINAL

IN ADFR

The document is
loaded in the ADF
while a function is
set that requires
scanning from the
original glass.

Place the document on
the original glass.

RESULTS ARE OVER xxx

The LDAP search
results exceed the
maximum specified
with

MAX.

SEARCH RESULT

in the LDAP SET-
TING menu.

Change the maximum
setting, or change the
search conditions (for
example, increase the
length of the key-
word), and then try
performing the LDAP
search again.

This message...

means...

Do this...

Advertising
This manual is related to the following products: