Konica Minolta bizhub C20X - Manual (Page 64)

Configuration Menu Overview 50
SPEED/DUPLEX
Setting
AUTO / 10BASE FULL /
10BASE HALF /
100BASE FULL /
100BASE HALF /
1000BASE FULL
Specifies the transmission speed for the
network and the transmission method
for bi-directional transmission.
IEEE802.1X
Setting
DISABLE / ENABLE
Select whether or not to enable
IEEE802.1X.
E-MAIL
SETTING
SMTP
Setting
DISABLE / ENABLE
Select whether to enable or disable
e-mail transmission operations for this
machine.
SENDER NAME
Specify the name of the E-mail sender
(up to 20 characters) used for network
scanning.
The default setting is “bizhub_C20”.
E-MAIL ADDRESS
Specify the E-mail address (up to 64
characters) of the E-mail sender used
for network scanning.
DEFAULT SUB-
JECT
Specify the subject (up to 20 characters)
of the E-mail message used for network
scanning.
The default setting is “from bizhub
C20”.
SMTP SERVER
ADDR.
Specify the IP address or host name (up
to 64 characters) for the SMTP server.
The default setting is “0.0.0.0”.
SMTP PORT NO.
Setting
1 to 65535 (Default: 25 )
Specify the port number communicating
with the SMTP server.
SMTP TIMEOUT
Setting
30 to 300 sec (Default:
60 sec )
Select the amount of time (in seconds)
until the connection with the SMTP
server times out.