Konica Minolta bizhub 200 - Manual (Page 31)

2 Administrator Operations
2-14 200/250/350
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
2.3.1 Performing Unlock Setting
2
Note
Do not leave the machine with the Admin. Management mode setting
screen left shown on the display. If it is absolutely necessary to leave the
machine, be sure first to log off from the Admin. Management mode.
<Setting can be made only from the control panel>
0 For the procedure to call the Security Settings to the display, see steps 1
through 3 of “Setting the Enhance Security function” on page 2-10.
1
Call the Security Settings to the screen from the control panel.
2
Touch [Unlock].
3
Select the function, for
which Prohibit Function
as a result of unautho-
rized access is to be un-
locked.
4
Touch [Enter].
This clears the unauthorized access check count of the specific func-
tion selected in step 3.
350_security_E.book 14 ページ ２００６年１１月２０日 月曜日 午前１０時４１分