Konica Minolta bizhub C550 User Manual
Page 198
Administrator mode
3
C550
3-91
For sending e-mail, administrator address must be specified. For details on
the administrator address setting, refer to “Machine Setting” on page 3-10.
2
Reminder
A SMTP authentication method that is supported by the SMTP server and
provided with the strongest encryption strength is automatically selected
from Digest-MD5, CRAM-MD5, PLAIN, and LOGIN.
Port Number
Default setting: 25
If “Start TLS” is selected, specify the port number.
Port No. (SSL)
Default setting: 465
If “SMTP over SSL” is selected, specify the port number to be used
for SSL communication.
Connection Timeout
Specify the amount of time until communication with the server
times out.
Max Mail Size
Select whether or not to limit the size of sent e-mail messages.
Server Capacity
Type in the capacity of the SMTP server when limiting e-mail mes-
sage sizes. (Range: 1 to 100 Mbytes)
Admin. E-mail Address
Displays the administrator address.
Device Mail Address
Type in the address of the device (up to 320 characters).
POP before SMTP
Select whether or not POP before SMTP is used. In order to perform
user authentication with POP before SMTP, some settings must be
specified so that the mail server can be accessed correctly with
POP. For details, refer to “E-mail Setting - E-mail RX (POP)” on
page 3-88.
POP before SMTP Time
Type in the POP before SMTP period. (Range: 0 to 60 seconds)
SMTP Authentication
To perform SMTP server authentication, select this check box.
User ID
Type in the user ID for performing SMTP server authentication (up
to 255 characters).
Password
Type in the password for SMTP server authentication (up to 128
characters).
Domain Name
Type in the domain name for the SMTP server.
Authentication Settings
This option appears when user authentication settings have been
specified. If “SMTP Authentication” is set to “ON”, select whether
user authentication or a set value is used.
Binary Division
To divide large e-mail messages and send them in small sections,
select this check box. This is used to send data that has exceeded
the maximum capacity when the maximum capacity is limited per
e-mail message on the e-mail server.
Divided Mail Size
Type in the binary division size. (Range: 100 to 15000 Kbytes)
Item
Description