Konica Minolta bizhub C550 - Manual (Page 73)

User mode 2
C550 2-38
2
Reminder
If the E-mail address to be registered does not match the E-mail address
of the certificate, the certificate cannot be registered. Confirm whether
both E-mail addresses match, and then register the certificate.
If “FTP” was selected
Limiting Access to Desti-
nations To specify the access level of the destination, click the [Display]
button. If an access permission group is specified for the user who
is logged on, the settings for “Search from Reference Allowed
Group” appear.
If “Search from Reference Allowed Group” is selected, click the
[Search from List] button, and then select an access permission
group from the list. If “Set direct Reference Allowed Level” is select-
ed, select a level.
Item Description
No. Specify the registration number.
Select “Use opening number” or “Direct Input”. If “Direct Input” is
selected, type in the number. If “0” is specified, the user box is au-
tomatically registered with the next available number.
Name Type in the name of the destination (up to 24 characters).
Index Select the index characters for the destination. To normally display
the destination in the touch panel, check the “Main” check box.
Host Address Type in the IP address or host name for the FTP server to be used
for transmitting (up to 63 characters). To type in the host name,
check the “Please check to enter host name.” check box. If the ma-
chine is set to use IPv6, an IPv6 address can also be specified.
File Path Type in the destination file path (up to 96 characters).
User ID Type in the user ID (up to 47 characters).
Password Type in the password (up to 31 characters).
anonymous Select either “ON” or “OFF”
PASV Mode Select either “ON” or “OFF”.
Proxy Select either “ON” or “OFF”.
Port No. Type in the port number. (Range: 1 to 65535; Default: 21)
Limiting Access to Desti-
nations To specify the access level of the destination, click the [Display]
button. If an access permission group is specified for the user who
is logged on, the settings for “Search from Reference Allowed
Group” appear.
If “Search from Reference Allowed Group” is selected, click the
[Search from List] button, and then select an access permission
group from the list. If “Set direct Reference Allowed Level” is select-
ed, select a level.
Item Description