Konica Minolta bizhub C550 - Manual (Page 97)

User mode 2
C550 2-62
Destination Information Specify the destination.
Select “Select from Address Book” or “Direct Input”. To select
a destination from the address book, click the [Search from List]
button, and then select from the list of address book destina-
tions. An address book destination can also be searched for us-
ing its number or index characters. To check the transmission
destinations, click the [Check Destination] button.
If “Direct Input” is selected, type in the host address. To type in
the host name, check the “Please check to enter host name.”
check box. If the machine is set to use IPv6, an IPv6 address
can also be specified. Type in the port number, and then select
the destination type.
Resolution Select the resolution.
File Type Select the file format.
Simplex/Duplex Select “1-Sided”, “2-Sided” or “Cover Sheet + 2-Sided”.
Original Type Select the document quality, such as text or photo.
Color Select the color mode. The file formats that can be saved may
be limited according to the Color setting. For details, refer to the
User’s Guide [Network Scanner Operations].
Separate Scan Select either “ON” or “OFF”.
Density Select the density.
Background Removal Adjust the density of the background.
Scan Size Select the document size (“Auto”, “Standard Size” or “Custom
Size”).
If “Standard Size” is selected, select the size and the feed direc-
tion.
If “Custom Size” is selected, specify the height and width.
Application Setting Click the [Display] button, and then specify settings for the func-
tions that are displayed.
Password TX Select whether or not to enable password transmission. If “ON”
is selected, specify the password.
F-Code Select whether or not to enable F-codes. If “Enable” is selected,
type in the SUB address and password.
2-Sided Binding Direction Select the position of the document binding margin.
Special Original Select “Normal”, “Mixed Original”, “Z-Folded Original” or “Long
Original” as the setting for the loaded document.
Book Scan Specify whether to perform book scan.
To specify this item, select settings for the scanning method
and center erasing. If any setting other than “Book Spread” is
selected for the scanning method, select the binding direction.
Erase Specify whether to perform frame erase.
To specify this item, specify the width that is erased on all sides
of the document (“Top”, “Bottom”, “Left” and “Right”).
Item Description