Konica Minolta bizhub C550 - Manual (Page 95)

User mode 2
C550 2-60
If “Fax” was selected
Item Description
No. Displays the registration number.
Name Type in the name of the program (up to 24 characters).
Destination Information Specify the destination.
Select “Select from Address Book” or “Direct Input”. To select
a destination from the address book, click the [Search from List]
button, and then select from the list of address book destina-
tions. An address book destination can also be searched for us-
ing its number or index characters. To check the transmission
destinations, click the [Check Destination] button.
If “Direct Input” is selected, type in the address (up to 38 char-
acters, including only numerals, #, *, T, P and E). Click the [Dis-
play] button beside “Communication Setting”, and then select
the communication setting (“V34 Off”, “ECM Off”, “International
Communication”, “Check Destination”). If the optional fax multi
line is installed, the line can be selected.
Resolution Select the resolution.
File Type Select the file format.
Simplex/Duplex Select “1-Sided”, “2-Sided” or “Cover Sheet + 2-Sided”.
Original Type Select the document quality, such as text or photo.
Separate Scan Select either “ON” or “OFF”.
Density Select the density.
Background Removal Adjust the density of the background.
Scan Size Select the document size (“Auto”, “Standard Size” or “Custom
Size”).
If “Standard Size” is selected, select the size and the feed direc-
tion.
If “Custom Size” is selected, specify the height and width.
Application Setting Click the [Display] button, and then specify settings for the func-
tions that are displayed.
Timer TX Select whether or not to enable timer transmission. If “ON” is
selected, specify the time.
Password TX Select whether or not to enable password transmission. If “ON”
is selected, specify the password.
F-Code Select whether or not to enable F-codes. If “Enable” is selected,
type in the SUB address and password.
2-Sided Binding Direction Select the position of the document binding margin.
Special Original Select “Normal”, “Mixed Original”, “Z-Folded Original” or “Long
Original” as the setting for the loaded document.
Book Scan Specify whether to perform book scan.
To specify this item, select settings for the scanning method
and center erasing. If any setting other than “Book Spread” is
selected for the scanning method, select the binding direction.
Erase Specify whether to perform frame erase.
To specify this item, specify the width that is erased on all sides
of the document (“Top”, “Bottom”, “Left” and “Right”).