Snmp setting, Snmp setting -101 – Konica Minolta bizhub C550 User Manual
Page 208
Advertising
Administrator mode
3
C550
3-101
SNMP Setting
Specify the SNMP settings.
Item
Description
SNMP
Select whether or not SNMP is used. If yes, specify whether to use
SNMP v1/v2 (IP), SNMP v3, and SNMP v1 (IPX).
SNMP v1 (IPX) can be specified only when IPX is enabled.
UDP Port Setting
Default setting: 161
Specify the UDP port number.
SNMP v1/v2c Setting
Specify settings for using SNMP v1/v2c.
Read Community Name
Specify the community name to be used for scanning (up to 15
characters).
Write Community Name
Specify the community name to be used for reading and writing (up
to 15 characters).
Advertising