Konica Minolta bizhub C550 - Manual (Page 226)

Administrator mode 3
C550 3-119
TCP Socket Setting
Specify the TCP socket settings. TCP socket is used during data transmis-
sions between the computer application and the machine.
2
Reminder
If the TCP socket setting is changed, be sure to turn the machine off, then
on again.
When the machine is turned off, then on again, turn the machine off with
the [Power] (auxiliary power) key before turning off the main power
switch. In addition, wait at least 10 seconds to turn the machine on after
turning it off; otherwise, the machine may not operate correctly.
If “Enhanced Security Mode” is set to enable, the “Use SSL/TLS” check
box is selected.
Item Description
TCP Socket/Port Number Select whether or not TCP socket is used.
To use SSL/TLS, select the check box, and then type in the port
number. (Range: 1 to 65535)
Use SSL/TLS/Port No.
(SSL) Select whether or not SSL/TLS is used. To use SSL/TLS, select the
check box, and then type in the port number. (Range: 1 to 65535)
TCP Socket (ASCII
Mode)/Port No. (ASCII
Mode) To use in the Flash format, select the “TCP Socket (ASCII Mode)”
check box. Type in the port number. (Range: 1 to 65535)