Konica Minolta bizhub 282 - Manual (Page 137)

4 IP Scanner
4-22 362/350/282/250/222/200
IP
Scan
ne
r
Chapter 4
Divided Settings dialog box
This dialog box appears so that settings can be specified to divide and save
scanned documents.
1
2
3
4
5
No. Element Name Description
1 “Divide a scanned docu-
ment to save” check box If this check box is selected, a scanned document can be
divided and saved as separate files. A document to be di-
vided and saved can be scanned in one operation.
2 “Divide by short separa-
tor” setting If this setting is selected and a document of different page
lengths is scanned, those pages are identified as inter-
leaves, and the document is divided by those interleaves
and saved as separate files.
When loading the document into the ADF, load the docu-
ment so that the left sides of the pages (leading edges) are
aligned.
There are limitations on the page sizes that can be mixed.
Refer to “Mixed originals paper sizes”.
This setting is available only if the “Divide a scanned docu-
ment to save” check box is selected.
3 “Files separator” check
box If this check box is selected, the pages inserted as inter-
leaves are also saved as image data.
4 “Divide by width” setting If this setting is selected and a document of different page
widths is scanned, the pages of the same width are saved
together as a separate file.
When loading the document into the ADF, load the docu-
ment so that the top edges of the pages (edges toward the
rear of the machine) are aligned.
This setting is available only if the “Divide a scanned docu-
ment to save” check box is selected.
5 “Divide document as sin-
gle pages” setting If this setting is selected, each page of the scanned docu-
ment is saved as a separate file.
This setting is available only if the “Divide a scanned docu-
ment to save” check box is selected.