Konica Minolta bizhub 282 - Manual (Page 249)

7 Specifying management settings
7-18 362/350/282/250/222/200
Sp
ecif
yin
g
man
age
men
t
set
ti
ngs
Chapter 7
Compared item and the setting for the number of digits compared in the CSI
signal
Example: When the number of digits to be compared in the CSI signal is set
to 6 and a 10-digit CSI signal is received
4 Specifies whether or
not the machine per-
forms a checked re-
ceiver transmission
if the called number
does not contain
special characters
for a checked re-
ceiver transmission. 0 Does not perform a
checked receiver trans-
mission ----------
1 Performs a checked re-
ceiver transmission
3, 2, 1, 0 Specifies the
number of digits of
the CSI signal that
are compared when
performing a
checked receiver
transmission.
(If the called number
does not fulfill the
number of digits
specified here, a
comparison is made
with all digits of the
called number. If a
comparison is made
with a comparison
number using spe-
cial characters, the
comparison is made
with all digits of the
comparison
number, regardless
of the number of
digits specified with
this setting.) 0000 Cancel ----------
0001 1 digit
0010 2 digits
0011 3 digits
0100 4 digits
0101 5 digits
0110 6 digits
0111 7 digits
1000 8 digits
1001 9digits
1010 10 digits
1011-1111 *Do not specify this set-
ting for this function.
Bit Description Setting Description Page Refer-
ence
Compared
item Comparison relationship Operation
Recipient’s
telephone
number When the recipient’s telephone number
has more digits than the number of dig-
its to be compared from the CSI signal The comparison is performed accord-
ing to the setting for the number of
digits compared in the CSI signal.
(With a 10-digit called number, digit 6
from the end is compared.)
When the recipient’s telephone number
has less digits than the number of digits
to be compared from the CSI signal The comparison is performed only
with the number of digits in the called
number.
(With a 4-digit called number, digit 4
from the end is compared.)