Konica Minolta bizhub 282 - Manual (Page 258)

Specifying management settings 7
362/350/282/250/222/200 7-27
Sp
ecif
yin
g
man
age
men
t
set
ti
ngs
Chapter 7
Specifying settings to limit the use of communication modes–2 (mode
476)
Specify whether to permit or prohibit the use of individual communication
modes. Prohibited communication modes do not appear in their selection
screens.
2
Note
Programmed one-touch dial buttons can be used for transmission even
if a prohibited communication mode has been specified.
If all communication modes are prohibited (modes 475 to 477), some
screens, such as those for specifying transmission settings, may not nor-
mally be displayed.
Settings at time of purchase
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
3 Specifies whether or
not the use of a
Scan to FTP is pro-
hibited. 0 Permitted ----------
1 Prohibited
2 Specifies whether or
not the use of an
FTP server is pro-
hibited. 0 Permitted ----------
1 Prohibited
1 Specifies whether or
not the use of SNMP
is prohibited. 0 Permitted ----------
1 Prohibited
0 ---------------------- 0 *Do not change this bit
when specifying settings
for this function. ----------
Bit Description Setting Description Page Refer-
ence
Bit 7 6 5 4 3 2 1 0
Setting 0 0 0 0 0 0 0 0 (HEX: 00)