Konica Minolta bizhub 282 - Manual (Page 250)

Specifying management settings 7
362/350/282/250/222/200 7-19
Sp
ecif
yin
g
man
age
men
t
set
ti
ngs
Chapter 7
Comparison
number When the comparison number has less
digits than the number of digits in the
CSI signal The comparison is performed only
with the number of digits in the com-
parison number.
(With a 10-digit comparison number,
digit 10 from the end is compared.)
When the comparison number has
more digits than the number of digits in
the CSI signal The comparison is performed only
with the number of digits in the com-
parison number.
(With a comparison number of 11 or
more digits, digit 11 from the end is
compared. However, since the CSI
signal contains only 10 digits, it will
not match, resulting in a transmission
error.)
Compared
item Comparison relationship Operation