Konica Minolta bizhub 282 - Manual (Page 229)

6 Specifying settings using PageScope Web Connection
6-26 362/350/282/250/222/200
Specif
ying set
tin
gs using
Pag
e
Scop
e We
b Conn
ecti
on
Chapter 6
4
Select a registered relay station, and then click [Apply].
5
If necessary, change the Port setting.
6
Click [Apply].
2
Reminder
If the port number is changed, be sure to turn the machine off, then on
again after the settings have been specified.
When turning the machine off, then on again with the main power switch,
wait about 10 seconds to turn the machine on after turning it off. The ma-
chine may not operate correctly if it is turned on immediately after being
turned off.