Konica Minolta bizhub 282 - Manual (Page 149)

4 IP Scanner
4-34 362/350/282/250/222/200
IP
Scan
ne
r
Chapter 4
Registering a scan button
Specify the machine scanning settings from IP Scanner, and then transfer
them to the machine and save them as a scan button. Make sure that Im-
ageReceiver is running.
0 Only one scan button can be programmed from a single computer (same
IP address).
0 A maximum of 6 scan buttons can be programmed on this machine. If 6
scan buttons have already been programmed, select a button in the ma-
chine’s touch panel, and then touch [Delete] to delete it. In this case,
“Scanner Available” remains displayed in IP Scanner. Click [Delete Scan-
ner Key] to display “Scanner Key Registration”.
1
In the main window, click [Scanner Key Registration].