Copying a one-touch dial button, Copying a one-touch dial button -38 – Konica Minolta bizhub 282 User Manual
Page 201
5
IP Relay operations
5-38
362/350/282/250/222/200
IP Relay operations
Chap
te
r 5
Copying a one-touch dial button
1
Perform steps 1 through 4 of the procedure in “To program a one-
touch dial button”.
2
Touch the button for the one-touch recipient to be copied.
3
Touch [One-Touch], and then touch [One-Touch Copy].
4
Touch the button where the one-touch dial button settings are to be
copied.
–
Select a one-touch dial button where no settings have been regis-
tered yet.
–
To deselect the one-touch dial button where the information is to
be copied to, touch the selected one-touch dial button again.
5
Touch [Enter] in each screen until the initial screen appears.
#014
One-Touch Copy
NO
Sub Address
Registration
Switch Sub/Main
Addresses
Enter
Cancel
One-
Touch
Dest.
Mode 1
Mode 2
One-
Touch
Tokyo2
Delete
100%
Memory
Free
IndexList
JPN
US
Enter
Cancel
One-Touch Copy
100%
Memory
Free
Tokyo
Tokyo
Osaka
Touch [Enter].