Konica Minolta bizhub 282 - Manual (Page 228)

Specifying settings using PageScope Web Connection 6
362/350/282/250/222/200 6-25
Specif
ying set
tin
gs using
Pag
e
Scop
e We
b Conn
ecti
on
Chapter 6
6.4 IP Relay Settings (Administrator mode)
When sending a fax as an IP relay, specify the IP address and domain name
of the relay machines. In addition, the main relay stations to be used can be
selected.
Selecting the IP relay station to be used
Select an IP relay station from the IP relay machines that have been regis-
tered in advance.
For details on registering an IP relay station, refer to “Registering an IP relay
station” on page 6-27.
Settings can be specified for the following.
To select a relay station
1
In the Administrator mode, click the Network tab.
2
Click [IP Relay Settings], then [IP Relay Settings].
3
To change the relay station, click [Select].
Parameter Description
IP Relay Destination The IP address of the currently selected relay station ap-
pears. To change the relay station, click [Select].
Relay Result Port Type in the number of the port that will receive the results.
If this number is changed, it will be applied after the ma-
chine is turned off, then on again.