Konica Minolta bizhub 282 - Manual (Page 254)

Specifying management settings 7
362/350/282/250/222/200 7-23
Sp
ecif
yin
g
man
age
men
t
set
ti
ngs
Chapter 7
Specifying settings for the information indicated in the report for IP relay
transmissions (mode 368)
Specify whether or not the results of IP relay transmissions are indicated in
the reception report.
Settings at time of purchase
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected.
Bit 7 6 5 4 3 2 1 0
Setting 1 1 0 0 0 0 1 0 (HEX: C2)
Bit Description Setting Description Page Refer-
ence
7 -------------------------- 1 *Do not change this bit
when specifying settings
for this function. ----------
6 Specifies the valid
range of administrator
passwords.
*Regardless of the set-
ting specified for this
bit, this machine is set
to normally require the
administrator pass-
word with the machine
and with PageScope
Web Connection. 1 The administrator pass-
word is required with this
machine and with Page-
Scope Web Connection. ----------
5, 4, 3, 2 -------------------------- 0000 *Do not change these bits
when specifying setting for
this function. ----------
1 Specifies whether or
not the results of scan
transmissions are indi-
cated in the transmis-
sion report. 0 Not indicated ----------
1 Indicated
0 Specifies whether or
not the results of IP re-
lay transmissions are
indicated in the recep-
tion report. 0 Not indicated ----------
1 Indicated