Konica Minolta bizhub 282 - Manual (Page 259)

7 Specifying management settings
7-28 362/350/282/250/222/200
Sp
ecif
yin
g
man
age
men
t
set
ti
ngs
Chapter 7
Specifying settings to limit the use of communication modes–3/Speci-
fying restrictions for registering fax addresses and printing reports and
specifying how one-touch dial recipients are displayed (mode 477)
Specify whether to permit or prohibit the use of individual communication
modes. Prohibited communication modes do not appear in their selection
screens.
Specify whether or not fax addresses can be registered and reports can be
printed by users, and specify whether or not one-touch dial information is
displayed in screens and reports.
Bit Description Setting Description Page Refer-
ence
7 Specifies whether or
not the use of the
Scan to SMB opera-
tion is prohibited. 0 Permitted ----------
1 Prohibited
6 Specifies whether or
not the use of SMB
printing is prohibit-
ed. 0 Permitted ----------
1 Prohibited
5 Specifies whether or
not the use of G3
faxing is prohibited. 0 Permitted ----------
1 Prohibited
4 Specifies whether or
not the use of the
Scan to HDD opera-
tion is prohibited. 0 Permitted ----------
1 Prohibited
3 Specifies whether or
not the use of the
Scan to E-Mail oper-
ation is prohibited. 0 Permitted ----------
1 Prohibited
2 Specifies whether or
not the use of the In-
ternet fax operation
is prohibited. 0 Permitted ----------
1 Prohibited
1 Specifies whether or
not the use of IP re-
lay is prohibited. 0 Permitted ----------
1 Prohibited
0 Specifies whether or
not the use of IP ad-
dress fax operation
is prohibited. 0 Permitted ----------
1 Prohibited