Specifying the transmission source information, Specifying the transmission source information -20 – Konica Minolta bizhub 282 User Manual
Page 45
2
IP address faxing
2-20
362/350/282/250/222/200
IP ad
dr
es
s
fa
x
ing
Chapter 2
2
Note
The following parameters and functions have no effect, even if settings
have been specified.
- “Subject Selection” on the Network tab
- “Reply Address” on the Network tab
- “File Name” on the Network tab
- “Email Notification” on the Network tab
Specifying the transmission source information
Select the information, such as this machine’s name, fax number or address
or the recipient’s name, that is printed at the edge of the page.
1
Touch [Menu].
–
If the optional fax kit has been installed, touch [FAX Menu].
2
Touch [TSI] on the Setting 1 tab.
–
If the optional fax kit has been installed, touch [TSI] on the Set 1 tab.
FROM: NEWYORK
Image data has been attached to the e-mail.
One-Touch Search
Direct
Input
Quality&
Reduction
Menu
Job List
SCANReady
Standard
Chain
100%
TSI
TX Report
Rotation TX
2in1
2-Sided TX
Network
Setting 1
TSI only
Setting 2
Memory
Free