Changing/deleting a one-touch dial button, Changing/deleting a one-touch dial button -38 – Konica Minolta bizhub 282 User Manual
Page 63
2
IP address faxing
2-38
362/350/282/250/222/200
IP ad
dr
es
s
fa
x
ing
Chapter 2
Changing/deleting a one-touch dial button
1
Perform steps 1 through 4 of the procedure in “To program a one-
touch dial button”.
2
Touch the one-touch dial button that you wish to change or delete.
3
Touch the button for the setting to be changed, and then change the
setting.
–
To delete the one-touch dial button, touch [Delete].
4
Check the information to be registered, and then touch [Enter].
–
When deleting, a confirmation message appears. Touch [Yes].
5
Touch [Enter] in each screen until the initial screen appears.
Enter
One-Touch
Select One-Touch to REG/CHANGE/DEL.
Touch [Enter].
IndexList
JPN
US
Tokyo Osaka Nagoya Fukuok
a
Center
1
Center
2
100%
Memory
Free
Tokyo2
One-
Touch
#014
Enter
Cancel
Tokyo2
Tokyo2
IP-TX
192.168.1.30
One-Touch Name
Communication Mode
Destination
Mode 1
Mode 2
One-
Touch
Dest.
Delete
100%
Memory
Free