Konica Minolta bizhub 282 - Manual (Page 96)

Scan to PC operations 3
362/350/282/250/222/200 3-21
Sca
n
t
o
PC op
er
at
ions
Chapter 3
2
Note
The following parameters and functions have no effect, even if settings
have been specified.
- “TSI” on the Setting 1 tab
- “Rotation TX” on the Setting 1 tab
- “Subject Selection” on the Network tab
- “Reply Address” on the Network tab
- “Email Notification” on the Network tab
Specifying the transmission report printing condition
The conditions for printing the transmission result report can be specified.
The conditions for printing the transmission result report are preset with the
“Report Settings” parameters from the Administrator Management 1 screen.
Follow the procedure described below to change these conditions.
1
Touch [Menu].
– If the optional fax kit has been installed, touch [FAX Menu].
2
Touch [TX Report] on the Setting 1 tab.
– If the optional fax kit has been installed, touch [TX Report] on the
Set 1 tab.
One-Touch Search Direct
Input
Quality&
Reduction Menu
Job List
SCANReady Standard Chain
100%
TSI TX Report
Rotation TX 2in1 2-Sided TX
Network Setting 1
TSI only
Setting 2
Memory
Free