Konica Minolta bizhub 4050 - Manual (Page 43)

[Print Functions] 2-33
2.4 Useful printing functions 2
2.4.8 Inserting paper into the original
Inserting a front or back cover ([Front Cover] / [Back Cover])
Insert a cover sheet different from text sheets into the head and end of the original.
You can select a sheet that is different from text sheets (colored paper or thick paper) as a front cover, and
collectively print the front cover with text pages.
1
In [Paper Tray] of the [Basic] tab, select the paper tray for printing text pages.
2
In the [Cover Mode] tab, select the [Front Cover] or [Back Cover] check box.
% If necessary, you can select whether or not to print the original on the inserted sheets or to leave
them blank. When the PS driver is used, you cannot print an original on the inserted sheets.
% In [Front Cover Tray] or [Back Cover Tray], select the paper tray for the paper to be used as the front
cover or the back cover.
Inserting a separator page ([Separator Page])
You can insert a sheet that is different from text sheets as a separator page on a job or copy basis.
1
In [Paper Tray] of the [Basic] tab, select the paper tray for printing text pages.
2
In the [Cover Mode] tab, select the [Separator Page] check box, then specify the position to insert a
separator page.
% In [Separator Page Tray], select a paper tray to load sheets to be used as separator pages.