Konica Minolta bizhub 4050 - Manual (Page 68)

[Print Functions] 2-58
2.6 Printer driver setting items 2
2.6.8 Available operations in the [Layout] tab
In the [Layout] tab, you can configure layout settings for printing. You can combine pages or adjust print po-
sitions.
Settings Description
[Combination] Select how the original pages are combined on sheets.
•
[2 in 1]/[4 in 1]/[6 in 1]/[9 in 1]/[16 in 1]:
Multiple pages are reduced and printed on the same side of one sheet. For
example, when you select [9 in 1], the size of every set of nine pages is re-
duced and printed on the same side of one sheet.
• [2 e 2]/[3 e 3]/[4 e 4] (PCL only):
The original image is enlarged, divided and printed on multiple sheets. For
example, when you select [2 e 2], one page of the original is divided and
printed on four sheets. When you join the printed sheets together, a large
poster is created.
If necessary, click [Combination Details...] to configure detailed settings about
page combination.
•
[Combination]: Select the page combination.
• [Layout Order]: When you have selected "N in 1" in [Combination], select
the order of pages in the layout.
• [Border]: When you have selected "N in 1" in [Combination], select this
check box if you want to draw border lines between pages. In addition, se-
lect the type of border lines.
• [Overlap width line]: When you have selected "N e N" in [Combination], se-
lect this check box if you want to create overlap margins.
[Rotate 180] Select this check box to rotate the original 180 degrees and print it.
[Skip Blank Pages] Select this check box to exclude blank pages in the original from the pages to
be printed.
[Print Type] Select the print sides of paper.
•
[1-Sided]: The original is printed on one side of a sheet of paper.
• [2-Sided]: The original is printed on both sides of a sheet of paper.
• [Booklet]: The original is printed in booklet format. Original pages are sort-
ed and printed on both sides of sheets in two-page spread mode. When
the printed sheets are collectively folded in two, they are arranged in the
page order like a book. If necessary, click [Booklet Details...], then specify
the binding position and whether or not to draw border lines.
[Binding Position] Select the binding position.
[Binding Margin] Select this check box to provide a margin on printed sheets.
Click [Binding Margin Settings...] to specify the size of the margin in detail.
•
[Shift Mode]: Select how the images are shifted for creating the margin.
• [Front Side]: Specify the size of the margin on the front side.
• [Back Side]: When you print on both sides, specify the size of the margin
on the back side. When the [Same value for front and back sides] check
box is selected, a margin of the same size is created on both the front and
back sides.
[Image Shift] Select this check box to fine-tune (shift) the print position of the image with re-
spect to the paper.
Click [Image Shift Settings...] to specify the print position in detail.
•
[Front Side]: Specify the upward/downward and rightward/leftward shift
distances for the front side.
• [Back Side]: When you print on both sides, specify the upward/downward
and rightward/leftward shift distances for the back side.