Konica Minolta KIP 2100 Scanner - Manual (Page 32)

Section 2 Copy Mode - Monochrome 2-4
1.2 Simple Copying
To copy, please follow these basic steps. The following chapters have details on
adjustments and parameters that the user can change to modify the copies as
required.
1.2.1 Select
Copy Mode
On the lower region of the Operator Panel, select “COPY”.
1.2.2 Select Size Mode
Select whether the document is an engineering or architectural size document. This
will allow the automatic width detection to function.
Engineering widths = 34, 22, 17, 11, and 8.5 inches
Architecture widths = 36, 30, 24, 18, 12, and 9 inches