Konica Minolta KIP 2100 Scanner - Manual (Page 49)

Section 2 Copy Mode - Monochrome 2-21
2.6.7 Installing Roll Media
When media is replaced or installed, a screen will automatically appear. This
screen allows the setting of the media type and width. Please see the KIP Printer’s
manual for the procedures to replace a roll of media.
a) If no changes are required, press cancel
b) If changes are required from the currently settings displayed, select the correct
media type and size for each deck and press OK.
This screen shows 36” bond for
deck one and 18” Vellum for Roll 2 deck.
Media types settings noted above can be changed at any time by pressing the
Media button on the main Copy Screen.