Konica Minolta KIP 2100 Scanner - Manual (Page 81)

Section 4 Scan Mode - Monochrome 4-7
2. 0 Operation Details
2.1 Main Screen
The main SCAN screen is selected with the Scan Button.
This screen contains all user functions for scanning to file. The following pages detail the
functions and settings of each button and sub screen that can be used to adjust the scan
parameters to achieve the required result.
2.2 Original
This region allows the setting of the Size Mode (Engineering or Architectural) and the
Original Document type.
2.2.1 Original
Size Mode
This button is used to select the Size Mode of Engineering or Architectural and Original
Image type.
This will allow the automatic width detection system to determine the image width when an
original is placed in the KIP 2100.
(Eng) Engineering widths = 34, 22, 17, 11, and 8.5 inches
(Arch) Architecture widths = 36, 30, 24, 18, 12, and 9 inches