2 simple scanning – Konica Minolta KIP 2100 Scanner User Manual
Page 77
Advertising
Section 4 Scan Mode - Monochrome
4-3
1.2 Simple Scanning
To scan to file, please follow these basic steps.
The following chapters have details on adjustments and parameters that the user can
change to modify the scans.
1.2.1 Select Scan Mode
On the lower region of the UI, select “SCAN”.
1.2.2 Select Size Mode
Select whether the document is an engineering or architectural size document. This will
allow the automatic width detection to function.
Engineering widths = 34, 22, 17, 11, and 8.5 inches
Architecture widths = 36, 30, 24, 18, 12, and 9 inches
Advertising