Konica Minolta bizhub C550 - Manual (Page 100)

Saving documents 2
C550 2-64
Original Settings
Specify the type of document that is loaded, for example, if it contains mixed
page sizes or is folded in a zigzag.
2
Note
The original settings and direction settings can be used together.
1
In the Save Document screen, touch [Original Settings].
2
Select settings for the Original Settings functions.
Parameter Description
Mixed Original Select this setting when documents of different sizes are loaded into
the ADF (optional). The scan speed is decreased since the size of
each page is detected before it is scanned.
Z-Folded Original Select this setting to detect the size of a zigzag-folded document by
the length fed through the ADF.
Long Original Select this setting for documents that are longer than the standard
size.
Original Direction Select the orientation of the document. After the document is
scanned, the data is processed so that it is correctly oriented.
Binding Position Select the binding position, such as when holes are punched in the
document or the document is stapled.
This adjusts the scan of double-sided documents so that the binding
position is not reversed.
Left Select this setting for a document with binding on the left side.
Top Select this setting for a document with binding at the top.
Auto: The binding is on the long side if the page is 297 mm or less,
or it is on the short side if the page is more than 297 mm.
Despeckle Select this setting to reduce the effect that dust on the left partition
glass has on images when the document is loaded into the ADF.