Konica Minolta bizhub C550 - Manual (Page 153)

Printing a user box document 4
C550 4-16
Adding a binding margin
A binding margin can be added to the left or right side or to the top of the
printed pages. Settings can be specified for the following.
1
In the Print screen, touch [Page Margin].
2
Touch [Yes].
3
Select the desired position for the binding margin, and then use the
keypad to specify the width of the binding margin.
– The width of the binding margin can be specified in 1/16-inch incre-
ments on the North American (inch) model (in 0.1 mm increments
on the European (metric) model).
– To set the binding margin to 0 mm, touch [None].
Parameter Description
Margin Position Select the location where the binding margin is to be added. If “Au-
to” is selected, a binding margin along the long side of the paper is
selected if the document length is less than 11-11/16 inches on the
North American (inch) model (less than 297 mm on the European
(metric) model). If the document length is more than 11-11/16 inches
on the North American (inch) model (more than 297 mm on the Eu-
ropean (metric) model), a binding margin along the short side of the
paper is selected.
Adjust Value An area with a width between 1/16 and 3/4 inches on the North
American (inch) model (between 0.1 and 20.0 mm on the European
(metric) model) can be specified. To specify a binding margin of 0
mm, touch [None].
Image Shift When a binding margin is created, the image can be shifted accord-
ing to the position of the created binding margin. The image can be
shifted between 1/16 and 10 inches on the North American (inch)
model (between 0.1 and 250 mm on the European (metric) model)
left, right, up or down, depending on the position of the binding mar-
gin. If the document is to be printed double-sided, touch [Change
Back Shift] to also specify the shift on the back side of the pages.