Konica Minolta bizhub C550 - Manual (Page 148)

Printing a user box document 4
C550 4-11
!
Detail
The feeding method when a finisher is installed can be changed from Ad-
ministrator mode. For details on the Finishing settings, refer to the User’s
Guide [Copy Operations].
When a Fold/Bind setting is selected, “Sort” is automatically selected,
and the “Group”, Offset, Staple and Punch settings are canceled.
In order to carry out the Z-fold finishing process, the Z-folding unit must
be installed on the optional finisher FS-608/FS-517/FS-518.
The printouts are Z-folded only when the loaded size of the saved docu-
ment supports Z-Fold (8-1/2 × 14 w,11 × 17 w, A3 w, B4 w or 8K w).
2
Reminder
In order to select a Fold/Bind setting, all of the following conditions must
be met.
The paper width must be between 7-3/16 and 12-1/4 inches on the North
American (inch) model (between 182 and 314 mm on the European (met-
ric) model).
The paper length must be between 10-1/8 and 18 inches on the North
American (inch) model (between 257 and 458 mm on the European (met-
ric) model).
In order to use a Fold/Bind setting, optional finisher FS-608 must be in-
stalled.
1
In the Print screen, touch [Finishing].