Konica Minolta bizhub Secure - Manual (Page 114)

bizhub 652/552 3-4
3.1 User Authentication Function 3
5
Enter the 8-to-64-digit User Password from the keyboard or keypad.
% Press the [C] key to clear all characters.
% Touch [Delete] to delete the last character entered.
% Touch [Shift] to show the upper case/symbol screen.
% Touch [Cancel] to go back to the screen shown in step 4.
6
Touch [OK].
7
Press [Access] or touch [Login]. If a document is stored in the ID & Print User Box, select the desired
login method.
% If a wrong User Name is entered, a message that tells that the authentication has failed appears.
Enter the correct User Name.
% If a wrong User Password is entered, a message that tells that the authentication has failed appears.
Enter the correct User Password.
% If the Enhanced Security Mode is set to [ON], the entry of a wrong User Password is counted as
unauthorized access. If a wrong User Password for the corresponding User Name entered is en-
tered a predetermined number of times (once to three times) or more set by the Administrator of the
machine, a message appears that tells that authentication has not been successful for any subse-
quent operation for authentication. The machine is then set into an access lock state, rejecting any
more logon attempts. To cancel the access lock state, the Administrator of the machine must per-
form the Release Setting. Contact the Administrator of the machine.
% If there are two ore more ID & Print Documents are involved, all of them will be printed. To select
and print only a desired document, select [Access] or [Login] and select the desired document from
those in the ID & Print User Box. For the detailed procedure to access the ID & Print Document, see
page 3-10.
% Go to step 15 if User Authentication only has been set, or "Synchronize" has been set for Synchro-
nize User Authentication & Account Track.
Login Method Description
[Begin Printing] Prints only the ID & Print Document of the corresponding user. The
user operation mode screen is not called to the screen.
[Print & Login] The user operation mode screen is called to the screen after the ID
& Print Document of the corresponding user is printed.
[Access] or [Login] If [Access] or [Login] is selected, only the ordinary login procedure is
applicable and no ID & Print Documents are printed.