Konica Minolta bizhub Secure - Manual (Page 64)

bizhub 652/552 2-49
2.11 Changing the Administrator Password 2
switch off, then on again, the machine may not function properly.
Here is the sequence, through which the main power switch and sub power switch are turned on
and off:
Turn off the sub power switch ö Turn off the main power switch ö Turn on the main power switch
ö Turn on the sub power switch
5
Enter the new 8-digit Administrator Password from the keyboard or keypad.
To prevent entry of a wrong password, enter the password again in [Password Confirmation].
% Press the [C] key to clear all characters.
% Touch [Delete] to delete the last character entered.
% Touch [Shift] to show the upper case/symbol screen.
% Touch [Cancel] to go back to the Security Settings screen.
6
Touch [OK].
% If the entered Administrator Password does not meet the requirements of the Password Rules, a
message that tells that the entered Administrator Password cannot be used appears. Enter the cor-
rect Administrator Password. For details of the Password Rules, see page 1-8.
% If the entered Administrator Password does not match, a message that tells that the Administrator
Password does not match appears. Enter the correct Administrator Password.