Konica Minolta bizhub Secure - Manual (Page 69)

bizhub 652/552 2-54
2.12 Protecting Data in the HDD 2
15
Touch [Encryption Priority] or [Overwrite Priority].
% [No] is the default setting.
16
Touch [OK].
% If [Encryption Priority] is switched to [Overwrite Priority], or vice versa, HDD Format must be per-
formed after the setting change. Perform HDD Format by following the steps below.
17
A confirmation message appears. Select [Yes] and touch [OK].
Item Description
[Encryption Priority] A different data overwrite method applies from [Mode 1] or [Mode 2]. To set
[Overwrite HDD Data], select [Encryption Priority].
[Overwrite Priority] The data overwrite method can be
specified. [Mode 1] Overwritten with
"0x00"
[Mode 2] Overwritten with
"0x00" ö Overwrit-
ten with "0xff" ö
Overwritten with let-
ter "a" (0x61) ö Veri-
fied