Konica Minolta bizhub Secure - Manual (Page 118)

bizhub 652/552 3-8
3.1 User Authentication Function 3
<From PageScope Web Connection>
0 Do not leave the machine while you are in the user (account) operation mode. If it is absolutely neces-
sary to leave the machine, be sure first to log off from the user (account) operation mode.
0 If any User Name not registered with this machine is authenticated through User Authentication when
[ON (External Server)] (Active Directory) is set for Authentication Method, the User Name is automati-
cally registered with this machine.
1
Start the Web browser.
2
Enter the IP address of the machine in the address bar.
3
Press the [Enter] key to start PageScope Web Connection.
4
Click the Registered User radio button and enter the User Name and User Password.
% If Account Track has been set, enter the User Name, User Password, Account Name, and Account
Password.
% If "Synchronize" has been set for "Synchronize User Authentication & Account Track," successful
authentication results from simply entering the User Name and User Password.
5
Click [Login].
% If a wrong User Password or Account Password is entered, a message that tells that the authenti-
cation has failed appears. Enter the correct User Password or Account Password.
% If the Enhanced Security Mode is set to [ON], the entry of a wrong User/Account Password is count-
ed as unauthorized access. If a wrong User/Account Password for the corresponding User/Account
Name entered is entered a predetermined number of times (once to three times) or more set by the
Administrator of the machine, a message appears that tells that authentication has not been suc-
cessful for any subsequent operation for authentication. The machine is then set into an access lock
state, rejecting any more logon attempts. To cancel the access lock state, the Administrator of the
machine must perform the Release Setting. Contact the Administrator of the machine.