Konica Minolta bizhub Secure - Manual (Page 24)

bizhub 652/552 2-9
2.2 Enhancing the Security Function 2
Setting the Enhanced Security Mode to [ON] changes the setting values of the following functions.
Function Name Factory Setting When Enhanced Security Mode is set to [ON]
Password Rules Invalid Enable (not to be changed)
Prohibited Functions
When Authentication Er-
ror Mode 1 Mode 2 (not to be changed): Three times is set.
* The number of times can be changed to once, twice,
or three times (twice, four times, or six times for the
WebDAV Server Password).
Confidential Document
Access Method Mode 1 Mode 2 (not to be changed)
* In association with Prohibit Functions When Authenti-
cation Error the method is changed from authentication
using Secure Print ID and password (Mode 1) to that us-
ing the password with the Secure Print Document first
narrowed down by Secure Print ID (Mode 2).
Public User Access Restrict Restrict (not to be changed)
User List OFF OFF (not to be changed)
Print Without Authentica-
tion Restrict Restrict (not to be changed)
User Box Admin. Setting Restrict Restrict (not to be changed)
SSL OFF ON (not to be changed)
SSL Encryption Strength AES-256,
3DES-168,
RC4-128,
DES-56,
RC4-40 AES/3DES (not to be changed to one containing
strength lower than AES/3DES)
Automatically Obtain Cer-
tificates of S/MIME No No (not to be changed)
S/MIME Encryption
Method 3DES 3DES (not to be changed to DES or RC-2)
FTP Server ON OFF (not to be changed)
SNMPv1/v2c Read/Write en-
abled Only Read is enabled (not to be changed)
SNMP v3 Security Level
and auth-password/priv-
password auth-password/
priv-password The security level can be selected from among [auth-
password] and [auth-password/priv-password].
An 8-digit-or-more auth-password and priv-password
can both be set.
Print Data Capture Allow Restrict (not to be changed)
Network Setting Clear
(Pagescope Web Con-
nection) Enabled Restrict
Administrator Password
Change Via Network
(Pagescope Web Con-
nection) Enabled Restrict
Release Time settings 5 min. The setting value should be 5 min. or more (no value less
than 5 can be set)
Change by the user of
destination data previ-
ously registered (Address
Book and Program) Allow Restrict (not to be changed)
Secure Print User Box
Preview Thumbnail View,
Detail View, and
Document De-
tails are enabled Only Detail View is enabled before password authenti-
cation (Mode 2)
Initialize (Network Set-
tings) Enabled Restrict (not to be changed)
Image Log Transfer Set-
tings OFF OFF (not to be changed)