Konica Minolta bizhub Secure - Manual (Page 85)

bizhub 652/552 2-70
2.16 SNMP Setting Function 2
2.16 SNMP Setting Function
When access to the machine by the Administrator of the machine through the Administrator Settings is au-
thenticated, the machine enables changing of the SNMP v3 Write User Password (auth-password, priv-pass-
word) required for accessing the MIB object over the network using the SNMP from the PC. In PageScope
Web Connection, import/export of the Device Setting is enabled, allowing the setting for Security Level of
SNMP v3 Setting to be saved or the saved backup data to be restored.
Each of the auth-password and priv-password can consist of 8 to 32 digits. The password entered for the
authentication purpose appears as "*" or "
●" on the display.
2.16.1 Changing the auth-password and priv-password
<From the Control Panel>
0 For the procedure to call the Administrator Settings on the display, see page 2-2.
0 Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
1
Call the Administrator Settings on the display from the control panel.
2
Touch [Network Settings].
3
Touch [SNMP Settings].