Konica Minolta bizhub 181 - Manual (Page 104)

Making copies 4
bizhub 181 4-11
Making
co
pies
Chapter 4
4.2 Stopping/restarting/canceling a copy job
Follow the procedure described below to stop a copy job.
1
Select the desired copy settings, and then press the [Start] key.
Copying begins.
2
During copying, press
the [Clear/Stop] key. The
message “>>Please
Wait” appears, and the
job is stopped.
– To continue the stopped job, select “NO”, and then press the [OK]
key.
– To delete the stopped job, select “YES”, and then press the [OK]
key.